Pure Sine Wave Power Inverter P600

Detailed Product Description

Test conditions:

1) Operating temperature: 25°C±2°C

2) Operating relative humidity: 40-90% RH

3) Input: DC 12.5V

Specifications (based on test conditions above):

1) Max. continuous output power: 600W

2) Surge capability peak output power: 1200W

3) DC input static current (no load): ≤0.5AMP

4) T.H.D: ≤5%

5) AC output wave form: pure sine wave

6) Normal input voltage range: 11-15V (DC12V)

7) High voltage cut off level: >15V

8) Low voltage alarm: 10.5V±0.5V

9) Low voltage cut off level: 10.2V±0.5V

10) Output AC voltage : AC 115V±5% RMS / AC 230V ±5% RMS

11) Output frequency level: 60HZ±1Hz  /  50HZ

12) Overload power range: 600W, 5-30%

13) Hi-pot test: PRI/sec, 1500V/AC  5mA/60s

14) Temperature protection: <65°C

15) Full load max. optimum efficiency: ≥85%

16) AC output short circuit protection: system shut down (no damage)

17) Fan run: inner temperature rising up is ≥40°C

18) Fault warning: alarm beep

19) LED indicator:

a) Normal: green

b) Fault: red green

20) Fuse (spade type): 40A x 3pcs

21) Dimensions (L x W x H): 215x 150 x 76mm

22) Environmental condition:

a) Operating temperature: 0-40°C 

b) Operating relative humidity: 10-90% RH

c) Storage temperature: -10-50°C

d) Storage relative humidity: 10-95% RH